Whole-Home Filtration

One System, Every Faucet

A whole-home filtration system is installed at your main water line — treating every drop before it reaches any faucet, shower, or appliance. Clean water for drinking, bathing, cooking, and laundry, all from a single point of entry.

Get a Free Water Analysis 863-529-2568

Why Whole-Home

Don't Just Filter One Tap — Filter Everything

A point-of-use filter at the kitchen sink is a good start — but it leaves every other tap untreated. A whole-home system protects your entire house from a single installation.

Total Coverage

Unlike point-of-use filters that only treat one sink, a whole-home system treats 100% of the water entering your house. Every tap, shower, and appliance gets the same clean water.

Better Showers

Showering in filtered water means no chlorine absorption through your skin, no chemical smell in the steam, and noticeably softer hair and skin.

Appliance Protection

Filtered water means less sediment and scale inside your water heater, dishwasher, and washing machine — extending their lifespan and reducing repair calls.

Simpler Maintenance

One system to maintain, one set of filters to change. No juggling different filter schedules for different faucets around the house.

Better Laundry

Clothes washed in filtered water come out cleaner, brighter, and softer — without the chlorine smell that can linger in fabrics washed in unfiltered water.

Resale Value

A professionally installed whole-home filtration system is a real selling point. Buyers see it as a premium upgrade that saves them the hassle of installing one themselves.

System Types

Build the Right Combination

A whole-home system is usually built from multiple stages, each targeting a specific water issue. We configure the right combination for your home.

Sediment + Carbon

The workhorse combination: a sediment pre-filter catches sand and particles, then a catalytic carbon tank removes chlorine, chloramines, chemicals, and improves taste and odor. Ideal for city water homes.

Sediment + Carbon + Softener

The full package: removes particles, chemicals, AND hardness minerals. Every faucet gets soft, clean, great-tasting water. The most popular configuration for Central Florida homes on well or city water.

Multi-Stage Well System

For well water: sediment filter → iron filter → carbon → softener → UV. Each stage handles a specific contaminant. We design the exact sequence your water needs based on test results.

Whole-Home FAQ

Common Questions

What's the difference between point-of-use and whole-home filtration?

A point-of-use system (like an under-sink RO) treats water at one faucet. A whole-home (point-of-entry) system is installed at your main water line and treats every drop entering your house — so every shower, sink, dishwasher, and washing machine gets filtered water.

Does a whole-home filter reduce water pressure?

A properly sized system should not noticeably reduce water pressure. We size the filter media tank and control valve to match your home's flow rate — typically 10–15 gallons per minute for an average home. You'll get the same pressure you had before, just cleaner water.

What maintenance does a whole-home system need?

Sediment pre-filters typically need changing every 6–12 months. Carbon media lasts 3–5 years before replacement. Softener salt needs topping up every 4–6 weeks. We offer maintenance plans where we handle all of this on schedule — you don't need to track anything.

One System, Whole-Home Clean Water

Every Tap Deserves Clean Water

Start with a free water analysis. We'll test what's coming into your home and design the right whole-home system for your needs and budget.

Get a Free Water Analysis 863-529-2568